CARTRIDGE SET – 1 MICRON SEDIMENT + KX CR1 CB 0.5 MICRON CARBON BLOCK
- Sediment filter = 10” x 2.5” Polyspun 1 Micron
- Carbon filter = Carbon Block
- Removes 99% of chlorine, taste and odour
- Removes cysts including giardia and cryptosporidium
Out of stock
Get an alert when the product is in stock:
Water Filter Superstore cartridge sets comprise two filters most commonly for use in Twin Filter Systems. This set is made up of 1 x 1 Micron Sediment Filter plus 1 x KX CR1 CB 0.5 Micron Carbon Block Cartridge.
SEDIMENT FILTER 10” X 2.5” POLYSPUN – 1 MICRON
This filter is used for removing sediment such as dirt, sand, scale and rust from water and old pipe work. It is commonly used as a pre-filter in twin filter systems. It provides excellent filtration of sediment due to its’ dual gradient technology. Large sediment is filtered in the outer layer and smaller sediment is filtered in the inner layer to ensure filtration efficiency. This multi-layer structure helps prevent the release of particles that may foul critical downstream components. Made from 100% polypropylene.
This is a standard size cartridge that will fit into a standard 10” housing.
This filter is tested and certified by NSF International against NSF/ANSI Standard 42 for material requirement only.
KX CR1 CARBON BLOCK CARTRIDGE
The KX Technologies Matrikx +CR1 is rated for the effective removal of giardia and cryptosporidium cysts and can remove 99% of chlorine, taste and odour for over 40,000 litres at a flow rate of over 10 litres per minute. This means its performance is superior to almost all other cartridges and makes it ideal in high use situations.
Fits standard 10” housing.